Accura

High Quality Sheet Fed Printing

 

Exceptional ink transfer properties are a key Accura benefit, a result of developments in surface rubber compound formulation. Reduced dot gain on the print is achieved, because target solid print densities can be achieved with lower ink film thickness between plate and blanket. Independent tests indicate Accura gives consistent dot gain values at or below the European guidelines.

Minimal dot gain and dense even solids on a variety of papers are produced by Accura. s combination of a thick compressible layer and a microground smooth, high performance surface compound.

Excellent smash resistance ensures extended blanket life.

Outstanding edge cut resistance, from the highly resilient surface compound, enables a variety of sheet sizes to be printed without the need for blanket replacement.

Easy blanket cleaning and stain resistance are further beneficial features of the smooth microground surface compound.

The surface characteristics are particularly suited for use with Toray waterless plates.


TECHNICAL FILE

Construction Three-ply compressible

Colour
Blue

Surface
Ground
Smoothness
0.7 Ám

Micro hardness
65░

Shore hardness
75░
Compressibility
6.5% @ 100 N/cm2

Elongation
<1.4% stretch @ 20 N/mm

Tensile strength
> 60 N/mm
Nominal thickness
1.68mm, product 0431
1.95mm, product 0432

Available roll widths
1550, 1850, 2100, 2300 mm

 

J.V. NIEBERGALL CDH - Your Partners for

Graphic Products / Printing Materials Construction Chemicals Water Recycling
Hollow Glassblock Systems Main Page

 

Phone : +49 6128 970-817
Fax : +49 6128 970-818
Postal Adress : Neuhofer Strasse 7,
D - 65527 Niedernhausen 2
EMail : info@Niebergall.de
Marketing marketing@Niebergall.de
Sales sales@Niebergall.de
Service service@Niebergall.de
Back to Mainpage
This page has been created by MTK 2000 , Updated: 12.03.2008