Drucken

                           V-22.Copter 

 

 

 

 

Sensor technology

The V-22.Copter is an ideal flight platform, allowing any kind of sensor up to 2 kg to be mounted It can fulfill every wish for you. Digital Multi-Hyper spectral and visible cameras for the photogrammetry can be assembled under its body in very efficient and protected setup. V-22.Copter can be fitted with sensors according to your specific requirements and make it the perfect flight system for all documentary and surveying tasks

Areas of application

With a V-22.Copter you will be able to cover large areas efficiently and at the lowest cost using your sensors. In addition to aerial surveying, the V-22.Copter is also suited for many other application areas such as crisis management, environmental protection, monitoring, security, film and TV industry, as well as delivery services and logistics. Take off and lift your project to a new level.

The modular design of the V-22.Copter allows it to be assembled and made ready for use in a few minutes. To disassemble and store it in the sturdy transport box is just as fast.

 

 

 

 

The Principle: Tiltrotor

The V-22.Copter is a vertical take-off and landing (VTOL) / hybrid aerial system. It combines the advantages of a copter with the benefits of a plane. In hover mode the motors are placed in front of as well as behind the wings, whereas during forward flight. The motors are located above and beneath the wings. This unique motor configuration provides maximum stabilization for the V-22.Copter at every tilt angle, even during forward flight and allows to reach top speed, cover long distances and stay airborne for a long time.

 

 

 

 

 

 

RANGE OF APPLICATION

 

THE PERFECT PLATFORM...

The concept is a combination between a multicopter (UAV) and a wing aircraft (fixed wing). A very efficient and patented tilt-rotor mechanism that has the benefits of both. It makes it possible to switch between multicopter mode and fixed wing mode within seconds.

By doing this the V-22.Copter can be vertically launched and landed anywhere. At the same time this smart rotor configuration allows long flight times and can cover a wide range.

Thanks to the new aerodynamic design and the innovative tilt-rotors, the V-22.Copter remains stable in the air even at high speeds and under various weather conditions. The V-22.Copter can be easily started and landed manually or autonomous using a tablet, and also offers autonomous intuitive control over long distances by means of a ground control station.

The V-22.Copter is the perfect platform to be equipped with high end sensors. In addition to aerial surveying, the V-22.Copter is also suited for many other application areas such as crisis management, environmental protection, monitoring, security, film and the TV industry, as well as delivery services and logistics.

 

 

V-22.COPTER - MADE IN GERMANY

The latest V-22.Copter is a robust, powerful and versatile hybrid drone. It is designed so that it can be vertically launched and landed anywhere. At the same time it allows for longer flight times and longer ranges than traditional builds. Four years of research and development have been put into the V-22.Copter The result is a combination between a multicopter (UAV) and a wing aircraft (fixed wing). A very efficient and patented tilt-rotor mechanism that has the benefits of both. It makes it possible to switch between multicopter mode and fixed wing mode within seconds. Thanks to the new aerodynamic design and the innovative tilt-rotors, the V-22.Copter remains stable in the air even at high speeds and under various weather conditions. The V-22.Copter can be easily startet and landed manually using a tablet, and also offers autonomous intuitive control over long distances by means of a ground control station. Each model is produced in a one-off production using precise hand crafting and is made from high strength carbon fibre and glass fibre composites. There is rely on more than 30 years of modeling experience (composite). Highest value on the durabilty of products, combining aircraft lightweightedness with robustness is what you can count on. .

 

PATENTED TILT-ROTOR MECHANISM

 

The V-22.Copter uses groundbreaking technology to uniquely balance the advantages of multicopters and wing aircrafts (fixed wing systems). The specially developed tilt-rotor mechanics allow for transitioning between quadrocopter mode and flight mode. This makes it possible to optimally use the advantages of both systems. The unique configuration of the rotors allows the V-22.Copter to maintain maximum stabilty during the entire transition. The V-22.Copter is fully controllable at any tilt angle of the rotors.

FIXED WING DRONE + Long flight times + Long range + Great maximum speed - Large area required for takeoff and landing - Critical minimum flight speed - High risk during takeoff and landing MULTICOPTER + Vertical takeoff and landing + No minimum flight speed - Short flight time - Low range - Low maximum speed  HYBRID DRONE + Vertical takeoff and landing + Low risk during takeoff and landing + Lange speed range + Long flight times + Long range

SENSOR TECHNOLOGY

The V-22.Copter is an ideal flight platform, allowing any kind of sensor up to 2 kg to be mounted It can fulfill every wish for you.  Digital Multi-Hyper spectral and visible cameras for the photogrammetry can be assembled under its body in very efficient and protected setup. V-22.Copter can be equipped with sensors according to your specific requirements and make it the perfect flight system for all documentary and surveying tasks.

AREAS OF APPLICATION

With a V-22.Copter you will be able to cover large areas efficiently and at the lowest cost using your sensors. In addition to aerial surveying, the V-22.Copter is also suited for many other application areas such as crisis management, environmental protection, monitoring, security, film and TV industry, as well as delivery services and logistics. Take off and lift your project to a new level!

TECHNICAL DETAILS

External dimensions:  0mm x 1321mm x 522mm Flight time: maxi. 120 minutes (Fixed Wing mode) Speed: Multicopter mode min. 0km/h; maximum 50km/h Fixed wing mode min. 40km/h; max 130km/h Range: 100km (fixed wing mode) Altitude: max. 5000m Rate of climb: Up to 6m/s Weight: 9,2 kg (including payload and battery) Payload: 2kg + 2 kg battery

Disclaimer: All specifications regarding performance of the V-22.Copter are variable depending on the configuration of the payload. Areas of application With a V-22.Copter you will be able to cover large areas efficiently and at the lowest cost using your sensors. In addition to aerial surveying, the V-22.Copter is also suited for many other application areas such as crisis management, environmental protection, monitoring, security, film and TV industry, as well as delivery services and logistics. Take off and lift your project to a new level! Construction: Composite (fiberglass and carbon fiber) Remote control: Tablet/ ground control + software + Radio Controller Flight modes: Manual + autonomous GPS navigation + return home function Takeoff / landing / hovering as multicopter (manual) Flight as fixed wing aircraft (autonomous) Drive: Electric