Printing blankets

Two-piece Can Decoration
Specially designed for use on Rutherford and Ragsdale two-piece can decorators, Metal 2 is an adhesive backed compressible blanket which can be quickly and easily stuck onto the blanket drum, removing the need for reel rod lockup systems.

Minimal dot gain, fine reverse line detail and dense solids at all operating speeds result from the combination of a thick compressible layer with a micro-ground smooth surface.

Total blanket stability, at decorator speeds in excess of 2,000cpm, is ensured by a high shear-strength, acrylic adhesive coating. This purpose-coated adhesive minimises the risk of adhesive remaining on the steel after blanket removal by penetrating the fabric back ply.

Metal 2 has a blended nitrile and polysulphide rubber surface suitable for varnish free (Novar) polyester inks, commonly used in Europe and the Pacific Rim. Outstanding durability is achieved through the absence of surface swelling and the thick compressible layer.

TECHNICAL FILE

Construction
Three-ply compressible with adhesive backing

Colour
Turquoise

Surface
Ground

Smoothness
1.0 µm

Micro hardness
69°

Shore hardness
76°

Compressibility
6.5% @ 100 N/cm2

Adhesive loop tack
> 20 N/25mm2

Adhesive shear strength
> 25 N/cm2
Nominal thickness
1.95mm, product 0409

Available roll widths
Bespoke cut sizes, gauged and sorted to provide a maximum gauge variation of ±0.01mm per pack. Pack size 8. 50 blankets, as requested.


J.V. NIEBERGALL - Your Partners for

Graphic Products / Printing Materials Construction Chemicals Water Recycling
Hollow Glassblock Systems
Main Page

 

Phone : +49 6128 970-817
Fax : +49 6128 970-818
Postal Adress : Neuhofer Strasse 7,

D - 65527 Niedernhausen 2
EMail : info@Niebergall.de
Marketing marketing@Niebergall.de
Sales sales@Niebergall.de
Service service@Niebergall.de

 

Back to Mainpage
This page has been created by MTK 2020 , Updated: 26.03.2016