Printing blankets

Metal 3

Sheetfed Metal Decorating (Using UV Curing Inks)
Developed to meet the special demands of metal decorators using UV curing inks.

Optimum ink transfer and no surface embossing are the results of the EPDM surface, which has excellent compatibility with most UV curing inks. However, the specific characteristics of EPDM make it unsuitable for use with conventional oven cured inks.

Sharp dot reproduction and open reverse line detail are delivered by the smooth micro-ground surface. This also assists with the release of lightweight aluminium and tin plate, giving consistent print length throughout the run.

Printing pressures adequate for dense, even solid prints, but with the ability to absorb over-pressure frequently encountered with older or poorly maintained presses, are allowed by the closed cell syntactic compressible structure.

Suitability for all printing presses, including Crabtree and Mailander, is achieved by pre-fitted aluminium slave bars.


TECHNICAL FILE

Construction
Four-ply 1.95mm compressible
Three-ply 1.68mm compressible

Colour
Orange

Surface
Micro-ground

Smoothness
0.8 Ám

Micro hardness
67░

Shore hardness
76░

Compressibility
6.9% @ 100 N/cm2

Elongation
<1.4% stretch @
20 N/mm

Tensile strength
> 60 N/mm

Nominal thickness
1.68mm, product 0323
1.95mm, product 0324

Available roll widths
2100, 2300mm


J.V. NIEBERGALL CDH - Your Partners for

Graphic Products / Printing Materials Construction Chemicals Water Recycling
Hollow Glassblock Systems Main Page

 

Phone : +49 6128 970-817
Fax : +49 6128 970-818
Postal Adress : Neuhofer Strasse 7,
D - 65527 Niedernhausen 2
EMail : info@Niebergall.de
Marketing marketing@Niebergall.de
Sales sales@Niebergall.de
Service service@Niebergall.de
Back to Mainpage
This page has been created by MTK 2000 , Updated: Mar  12, 2008